Sony STR-DN2010 用户手册
139
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm
masterpage: Right
STR-DN2010
4-182-049-11(1)
Ad
ditional Inf
ditional Inf
o
rmation
Recording cannot be carried out.
• Check that the components are connected
correctly.
• Select the source component using the
input buttons (page 54).
The MULTI CHANNEL DECODING
indicator does not light up in blue.
indicator does not light up in blue.
• Check that the playback component is
connected to a digital jack and the input is
selected properly on this receiver.
selected properly on this receiver.
• Check whether the input source of the
software being played back corresponds to
the multi channel format.
the multi channel format.
• Check whether the setup on the playback
component is set to multi channel sound.
• Check to make sure the selected digital
audio input jack is not assigned to other
inputs in “Input Assign” in the Input
Option menu (page 104).
inputs in “Input Assign” in the Input
Option menu (page 104).
There is no sound from the component
connected to the DIGITAL MEDIA PORT
adapter.
connected to the DIGITAL MEDIA PORT
adapter.
• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter
• The DIGITAL MEDIA PORT adapter
and/or component is not connected
correctly. Turn off the receiver, then
reconnect the DIGITAL MEDIA PORT
adapter and/or component.
correctly. Turn off the receiver, then
reconnect the DIGITAL MEDIA PORT
adapter and/or component.
• Check the DIGITAL MEDIA PORT
adapter and/or component device to make
sure it supports this receiver.
sure it supports this receiver.
There is no picture or an unclear
picture appears on the TV screen or
monitor.
picture appears on the TV screen or
monitor.
• Select the appropriate input using the input
buttons.
• Set your TV to the appropriate input mode.
• Move your audio components away from
• Move your audio components away from
the TV.
• Assign the component video input
correctly.
• The input signal should be same as the
input function when you are up-converting
an input signal with this receiver
an input signal with this receiver
• Depending on the DIGITAL MEDIA
PORT adapter, video output may not be
possible.
possible.
• When you use an HDMI-DVI conversion
cable for the connection, the image may
not be output correctly.
not be output correctly.
The image of the COMPONENT VIDEO
MONITOR OUT is corrupted.
MONITOR OUT is corrupted.
• The resolution of output signals from the
COMPONENT VIDEO MONITOR OUT
jacks may not be supported by your TV. In
this case, select the appropriate resolution
on the receiver (page 116).
jacks may not be supported by your TV. In
this case, select the appropriate resolution
on the receiver (page 116).
Recording cannot be carried out.
• Check that the components are connected
correctly.
• Select the source component using the
input buttons (page 54).
The GUI menu does not appear on the
TV screen.
TV screen.
• Press GUI MODE repeatedly to select
“GUI ON”. If the GUI menu still does not
appear on the TV screen, press MENU.
appear on the TV screen, press MENU.
• Check that the TV is connected correctly.
The source sound input from the HDMI
IN jack on the receiver is not output
from the speakers connected to the
receiver or TV speaker.
IN jack on the receiver is not output
from the speakers connected to the
receiver or TV speaker.
• Check the setting of “Audio Out” in the
• Check that the component is connected
correctly to the HDMI jack for that
component.
component.
• You cannot listen to the Super Audio CD
by connecting HDMI.
Video
HDMI
continued