Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound 
during a 1080p, Deep Color (Deep Colour) 
or 3D transmission.

• Sound may not be output from the receiver 

while the GUI appears on the TV screen. 
Press GUI MODE to select “GUI OFF”.

• Make sure that cables are correctly and 

securely connected to components.

• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound 
during a 1080p, Deep Color (Deep Colour) 
or 3D transmission.

• Depending on the TV or the video 

component, 3D images may not be 
displayed. Check the 3D image formats 
supported by the system (page 146).

• Check the HDMI connection (page 25).
• Make sure “Control for HDMI” is set to 

“ON” in HDMI Settings menu. 

• Make sure the connected component is 

compatible with the Control for HDMI 
function.

• Check the Control for HDMI settings on 

the connected component. Refer to the 
operating instructions of the connected 
component.

• When “Control for HDMI” is set to 

“OFF”, the “BRAVIA” Sync does not 
work properly, even if a component is 
connected to the HDMI IN jack.

• The types and the number of components 

which can be controlled by the 
“BRAVIA” Sync are restricted in the 
HDMI CEC standard as follows.
– Recording component (Blu-ray Disc 

recorder, DVD recorder, etc.): up to 3 
components

– Playback component (Blu-ray Disc 

player, DVD player, etc.): up to 3 
components

– Tuner-related component: up to 4 

components

– AV receiver (audio system): up to 1 

component

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “Audio Out” 
settings in HDMI Settings menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and 
receiver.

– “AMP” if you want to listen to the 

sound from the receiver.

• When you connect the receiver to a video 

component (projector, etc.), sound may 
not be output from the receiver. In this 
case, select “AMP”.

• If you cannot listen to the sound of a 

component connected to the receiver 
while TV input is selected on the receiver
– Change the input of the receiver to 

HDMI when you want to watch a 
program on a component connected via 
HDMI connection to the receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Select the component or input you want 

to watch when you watch a program on 
the component connected to the TV. 
Refer to the operating instructions of the 
TV on this operation.