Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

You can select the front speakers you want to 
drive. 
Be sure to use the buttons on the receiver for 
this operation.

You can confirm the selected speakers 
terminals by checking the indicator on the 
display.

* To select “SP B” or “SP A B”, set “Sur Back 

Assign” to “SPEAKER B” in the Speaker Settings 
menu (page 41).

Press SPEAKERS repeatedly until the “SP A” 
and “SP B” indicators on the display do not 
light up. “SPK OFF” appears on the display.

You cannot switch the front speaker system by 
pressing SPEAKERS when the headphones are 
connected.

 

This receiver is equipped with DCAC (Digital 
Cinema Auto Calibration) function which 
allows you to perform automatic calibration as 
follows:
• Check the connection between each speaker 

and the receiver.

• Adjust the speaker level.
• Measure the distance of each speaker from 

your seating position.

a)b)

• Measure the speaker size.

a)

• Measure the speaker polarity.

a)

• Measure the frequency characteristics.

a)c)

a)

The measurement result is not utilized when 

 

“A. DIRECT” is selected.

b)

The measurement result is not utilized when 
signals with a sampling frequency of more than 

 

96 kHz are being received.

c)

The measurement result is not utilized when 
signals with a sampling frequency of more than 

 

48 kHz are being received.

The DCAC is designed to obtain proper sound 
balance in your room. However, you can 
adjust the speaker levels manually according 
to your preference. For details, see “Test 
Tone” (page 111).

 

The SPEAKERS FRONT A 

 

terminals

SP A

The SPEAKERS SURROUND 
BACK/FRONT HIGH/BI-AMP/
FRONT B terminals

SP B*

Both the SPEAKERS FRONT A and 
SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B 
terminals (parallel connection)

SP A B*

SPEAKERS