Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US07ADD_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

• Select the appropriate input using the input 

buttons.

• Select the appropriate HDMI OUT jack 

using the HDMI OUT button.

• Set your TV to the appropriate input mode.
• Move your audio equipment away from 

the TV.

• Assign the component video input 

correctly.

• The input signal should be same as the 

input function when you are up-converting 
an input signal with this receiver 

 

• Make sure that cables are correctly and 

securely connected to equipment.

• Depending on the playback equipment, 

you may need to set up the equipment. 
Refer to the operating instructions 
supplied with each equipment.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour), 4K or 3D transmission.

• Composite signals can not be upconverted 

to component video signals (page 20).

• When the same input is selected for both 

main zone and zone 2 and the GUI menu is 
displayed on the TV in main zone, the 
audio and video signal of HDMI input will 
not be output from HDMI OUT B 

 

(ZONE 2) jack.

• Depending on the TV or the video 

equipment, 3D images may not be 
displayed. Check the 3D image formats 
supported by the receiver (page 134).

• Depending on the TV or the video 

equipment, 4K images may not be 
displayed. Check the video capability and 
setting of your TV and video equipment. 
Also, make sure you connect the video 
equipment to 4K available HDMI IN jack 
of this receiver.

• When the receiver enters into standby 

mode, image is from the last HDMI 
equipment selection before you turned off 
the receiver. If you are enjoying other 
equipment, play the equipment and 
perform the One-Touch Play operation, or 
turn on the receiver to select the HDMI 
equipment you want to enjoy.

• Make sure “Pass Through” is set to “ON” 

in the HDMI Settings menu if you connect 
equipment not compatible with the 
“BRAVIA” Sync to the receiver (page 
103).

• Check that the equipment is connected 

correctly.

• Select the source equipment using the 

input buttons (page 54).

• Video input signals via HDMI IN and 

COMPONENT VIDEO IN jacks cannot 
be recorded.

• Copyright protection to prevent recording 

is contained in the sources. In this case, 
you may not be able to record from the 
sources.

• Press GUI MODE repeatedly to select 

“GUI ON”. If the GUI menu still does not 
appear on the TV screen, press MENU.

• GUI menu will not appear on the TV in 

zone 2. GUI and upconverted video signal 
will not be output from HDMI OUT B 
(ZONE 2) jack when “Zone2 / OutB” is set 
to “Zone2”.

• Check that the TV is connected correctly 

via HDMI.

• Depending on the TV, the GUI menu may 

take some time to appear on the TV screen.

• GUI does not support composite and 

component signals.