Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

If you have an Internet connection, you can 
connect this receiver to the Internet as well. 
You can connect through a wireless or a wired 
LAN connection.

The following system environment is required 
to use the network function of the receiver.

A Broadband line connection
A Broadband line connection to the Internet is 
required in order to listen to Sony 
Entertainment Network (SEN) and to update 
the software of the receiver.

Modem
This is the device that is connected to the 
broadband line to communicate with the 
Internet. Some of these devices are integrated 
with the router.

Router
• Use a router compatible with 100 Mbps or 

greater transmission speeds to enjoy content 
on your home network.

• We recommend that you use a router 

equipped with the built-in DHCP (Dynamic 
Host Configuration Protocol) server.

 

This function automatically assigns IP 
addresses on the LAN.

• Use a wireless LAN router/access point if 

you want to use a wireless LAN connection.

LAN cable (CAT5) (For a wired LAN 
connection only)
• We recommend that you use this type of 

cable for a wired LAN.

 

Some flat-type LAN cables are easily 
affected by noise. We recommend that you 
use normal-type cables.

• If the receiver is used in an environment in 

which there is power supply noise from 
electric products or in a noisy network 
environment, use a shielded-type LAN 
cable.

Server
A server is a device which delivers content 
(music, photos, and videos) to a DLNA device 
on a home network. A device that can be used 
as a server (a computer, etc.) must be 
connected to your wireless or wired LAN 
home network*.

* For details on servers which are compatible with 

this receiver, see page 70.