Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

 

Connect the AC power cord (mains lead) to a 
wall outlet.

A several space is left between the plug and the 
rear panel even when the power cord (mains 
lead) is inserted firmly. The cord is supposed 
be connected this way. This is not malfunction.

Press ?/1 to turn on the receiver.

You can also turn on the receiver using ?/1 on 
the remote control.
When you turn off the receiver, press ?/1 
again. “STANDBY” flashes on the display 
window. Do not disconnect the AC power cord
(mains lead) while “STANDBY” is flashing.
This may cause a malfunction.

When the receiver is in standby mode, the 

 

ON/STANDBY indicator on the front panel lights 
up in amber.

Set “Ctrl for HDMI” (page 103), “Pass 
Through” (page 103), “Network Standby” 
(page 106) and “BT Standby” (page 107) to 
“OFF”, and turn off the power for zone 2.
If “Ctrl for HDMI” (page 103), “Pass 
Through” (page 103), “Network Standby” 
(page 106), or “BT Standby” (page 107) is set 
to “ON”, or the power for zone 2 is turned on, 
the lamp above ?/1 lights up in amber.

The top of the receiver may become hot while the 
receiver is in standby mode. This condition occurs 
because current is flowing in the internal circuits of 
the receiver. This is not a malfunction.

AC IN terminal

To the wall outlet

AC power cord 
(mains lead) 
(supplied)

?/1