Sony STR-DA1800ES 用户手册

下载
页码 288
45
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-12(2)
 
Pre
p
ar
ing the
 R
eceive
r
1
Select the speaker pattern 
(page 42).
If you connect front high speakers, select 
the speaker pattern that has front high 
speakers (5/x.x or 4/x.x) each time 
you perform Auto Calibration. 
Otherwise, the characteristics of the front 
high speakers cannot be measured.
2
Connect the supplied optimizer 
microphone to the AUTO CAL 
MIC jack.
3
Set up the optimizer 
microphone.
Place the optimizer microphone at your 
seating position. Use a stool or tripod so 
that the optimizer microphone remains at 
the same height as your ears.
Confirm active subwoofer setup
• When a subwoofer is connected, turn on the 
subwoofer and turn up the volume prior to 
activating the subwoofer. Turn the LEVEL 
to just before the mid-point.
• If you connect a subwoofer with a crossover 
frequency function, set the value to 
maximum.
• If you connect a subwoofer with an auto 
standby function, set it to off (deactivated).
Note
Depending on the characteristics of the subwoofer 
you are using, the setup distance value may be 
different from the actual position.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press 
V/v repeatedly to select 
 Settings”, then press 
 or 
b.
The Settings menu list appears on the TV 
screen.
Performing Auto Calibration
V/v/B/b,  
MENU
MASTER 
VOL +/–
Input 
buttons
?/1 
MUTING
AUTO 
CAL
SHIFT
continued