Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

V/v repeatedly to select 

b.

B/b repeatedly to select 

The measurement process will take 
approximately 30 seconds with a test 
tone.
When the measurement ends, a beep 
sounds and the screen switches.

If an error code appears on the screen, see 
“Message list after Auto Calibration 
measurement” (page 48).

V/v repeatedly to select 

Retry: 

 

Performs the Auto Calibration again.

Save: 

 

Save the measurement results and exits 
the setting process.

Warning: 

 

Displays warning related to the 
measurement results. See “Message list 
after Auto Calibration measurement” 
(page 48).

 

Exits the setting process without saving 
the measurement results.

Select “Save” in step 7.

• The A.P.M. (Automatic Phase Matching) 

function is activated after you save the 
measurement result. 

• The A.P.M. function does not work in the 

following cases.  
– The calibration type is set to “Off” when 

using the “Cal. Type” Auto Calibration 

 

(page 47).  

– When Dolby TrueHD or DTS-HD signals 

with a sampling frequency of more than 
48 kHz are being received.

B/b repeatedly to select 

 

Makes the measurement of frequency 
from each speaker flat.

 

Sets to “the Sony listening room 
standard” frequency characteristics.

 

Adjusts the characteristics of all the 
speakers to match the characteristics of 
the front speaker.