Samsung 80 用户手册
13
Manual tuning - FM
1. Fully extend the telescopic aerial.
2. Press
the
On / Standby button to switch on your sound system.
3. Press
the
DAB/FM button to select the FM band.
4. Rotate
the
Tuning control to tune to a station. The frequency will
change in steps of 50kHz.
If the radio is tuned to a station of suffi cient signal strength with RDS
information present, then the display may change to show the station
name. After ten seconds the display will revert to showing the time
and day.
information present, then the display may change to show the station
name. After ten seconds the display will revert to showing the time
and day.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set
the
Volume to the desired setting.
7. To switch off your sound system press the On / Standby button.
If you fi nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 27 for further details.
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 27 for further details.
2,7
3
4
6