Philips FW-P78 用户手册
23
English
3139 116 19782
4 Press DUB (HSD)
once for normal
speed dubbing or
twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
™ "NORMAL" (normal speed) or
"
FAST" (high speed) will be
displayed, followed by "
DUB" with
"
< or >" scrolling left or right
depending on the tape side selected.
™ The
HSD
appears on the display
during high speed dubbing.
• Dubbing will start immediately.
™ The
REC
starts flashing.
5 Press Ç to stop dubbing.
Notes:
– Only
– Only
å
å
å
å
å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
volume.
– You can listen to another source while
dubbing.
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the order
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press REC to start recording.
™ The
REC
starts flashing.
• CD will start playback automatically.
4 Press Ç to stop recording.
4 Press Ç to stop recording.
Recording the mixed sound /
One Touch Recording
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
tape deck 2 except dubbing mode.
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
press REC, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2.
TUNER or AUX) will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press REC to start recording.
2 Press REC to start recording.
™ The
REC
starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
– When you press RECORD while in TAPE
mode, "SELECT SOURCE" will be
displayed. One Touch Recording is not
possible in TAPE mode.
displayed. One Touch Recording is not
possible in TAPE mode.
Digital Recording via Digital
Out
Out
For CD digital recording, please refer to the
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
RECORDING
Untitled-2
6/8/01, 10:13 AM
23