Philips FW-P78 用户手册

24

3139 116 19782

You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about 7
seconds.

• Press CLOCK/TIMER briefly.

™ "PM 10:38 or 22:38" (the

current time) will be displayed
depending on whether you have
selected  12- or 24-hour mode.

™ "--:::::--" will be displayed if the

clock is not set.

Note:
– When the system goes into low power

standby mode, the clock setting will not
be displayed.

The clock can be set in either 12- or 24-
hour mode, e.g.  "

AM 12:00" or

"

00:00". Before setting the clock, you

must be in the View Clock mode.

1 Press CLOCK/TIMER to select clock

mode.

2 Press PROG 

(on the system only)  to

select 12- and 24- hour mode.
™ If 12-hour mode is selected,

"

AM 12:00" starts flashing.

™ If 24-hour mode is selected,

"

00:00" starts flashing.

3 Set the hour with à or á on the

system.

4 Set the minute with í or ë on the

system.

DIGITAL SOUND

CONTROL

DYNAMIC BASS
BOOST

TAPE

CD

DUB

(HSD)

REC

STANDBY
ON

SIDE A•B

A.REV

TUNER

AUX

PRESET ▲

▲

STOP • CLEAR

SEARCH • TUNING

PLAY

PAUSE

PREV

NEXT

C D 1  •   2   •  3

CDR / VIDEO

BAND

TAPE  1 •  2

SIDE

MIC 

MIC

LEVEL

5 Press CLOCK/TIMER again to store the

setting.
™ The clock starts.

• To exit without storing the setting, press

Ç on the system

Notes:
– During clock setting,  if no button is

pressed within 90 seconds, the system
will exit clock setting mode
automatically.

– When a power interruption occurs, the

clock setting is erased.

• The system can switch on to CD,

TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
alarm to wake you up.

• Before setting the timer, make sure the

clock is set correctly.

• The timer will always be switched on

once it is set.

1 Press and hold CLOCK/TIMER for more

than 

2 seconds to select timer mode.

™ “ AM 12:00” or “00:00" or the

last timer setting starts flashing
depending on whether you have
selected  12- or 24-hour mode.

™ The 

 starts flashing.

™ The selected source is lit while other

available sources are flashing.

2 Press CD, TUNER or TAPE to select the

desired source.

• Before selecting CD or TAPE, make sure

a CD or tape is loaded in the CD tray or
tape deck 2.

3 Press à or á  on the system to set

the hour for the timer to start.

4 Press í or ë on the system to set the

minute for the timer to start.

Untitled-2

6/8/01, 10:13 AM

24