ONKYO TX-SR702 操作指南
48
First Time Setup—Continued
Double Bass
With the Double Bass function, you can boost bass out-
put by feeding bass sounds from the front left and right
channels to the subwoofer. This function can be set only
if the Subwoofer setting in step 4 is set to Yes, and the
Front setting in step 5 is set to Large.
In the speaker setup screen, you can choose how bass
information is distributed to your speakers only if you
have large front left and right speakers AND a sub-
woofer.
put by feeding bass sounds from the front left and right
channels to the subwoofer. This function can be set only
if the Subwoofer setting in step 4 is set to Yes, and the
Front setting in step 5 is set to Large.
In the speaker setup screen, you can choose how bass
information is distributed to your speakers only if you
have large front left and right speakers AND a sub-
woofer.
Notes:
• This procedure can also be performed on the AV
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
Speaker Distance
Here you can specify the distance from each speaker to
the listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer
intended.
the listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer
intended.
11
Use the Up and Down [
]/[
]
buttons to select “h. Double
Bass,” and then use the Left and
Right [
Bass,” and then use the Left and
Right [
]/[
] buttons to select:
On: Double Bass function on.
Front left and right bass also
goes to the subwoofer simul-
taneously.
goes to the subwoofer simul-
taneously.
Off: Double Bass function off
(default).
With the TX-SR702/702E,
“Double Bass Off” is pre-
ferred by THX but to decide
which setting is best for your
room, once you have posi-
tioned all of your speakers,
choose the option which gives
you the most solid sounding
bass.
With the TX-SR702/702E,
“Double Bass Off” is pre-
ferred by THX but to decide
which setting is best for your
room, once you have posi-
tioned all of your speakers,
choose the option which gives
you the most solid sounding
bass.
12
Press the [SETUP] button.
The setup menu closes.
The setup menu closes.
This setting is not set automatically by the Automatic
Speaker Setup function (see page 39).
Speaker Setup function (see page 39).
ENTER
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “2. Speaker
Setup,” and then press [ENTER].
The Speaker Setup menu appears.
Setup,” and then press [ENTER].
The Speaker Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “2. Speaker Dis-
tance,” and then press [ENTER].
tance,” and then press [ENTER].
This setting is set automatically by the Automatic
Speaker Setup function (see page 39).
Speaker Setup function (see page 39).
1, 7
2–5
2, 3
1
RECEIVER
ENTER
ENTER
ENTER
ENTER
4_Setup_En Page 48 Tuesday, September 7, 2004 3:10 PM