ONKYO TX-SR702 操作指南
49
First Time Setup
—Continued
Notes:
• On the TX-SR702/702E, if the distance between the
furthest and nearest speakers is greater than 20 feet (6
meters), corrected values suitable for home theater use
will be set automatically.
meters), corrected values suitable for home theater use
will be set automatically.
• On the TX-SR602/602E and TX-SR8260, the Center
and Subwoofer distances can be set up to 5 ft. (1.5 m)
more or less than the Front distance. For example, if
the Front distance is set to 20 ft. (6 m), the Center and
Subwoofer distances can be set between 15 and 25 ft.
(4.5 and 7.5 m). The SurrRight, Surr Left, and Surr
Back distances can be set up to 5 ft. (1.5 m) more or
15 ft. (4.5 m) less than the Front distance. For exam-
ple, if the Front distance is set to 20 ft. (6 m), the Sur-
rRight, Surr Left, and Surr Back distances can be set
between 5 and 25 ft. (1.5 and 7.5 m).
more or less than the Front distance. For example, if
the Front distance is set to 20 ft. (6 m), the Center and
Subwoofer distances can be set between 15 and 25 ft.
(4.5 and 7.5 m). The SurrRight, Surr Left, and Surr
Back distances can be set up to 5 ft. (1.5 m) more or
15 ft. (4.5 m) less than the Front distance. For exam-
ple, if the Front distance is set to 20 ft. (6 m), the Sur-
rRight, Surr Left, and Surr Back distances can be set
between 5 and 25 ft. (1.5 and 7.5 m).
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
The Speaker Distance menu appears.
Note:
Speakers that you set to No or None on
the Speaker Configuration page
(page 46) cannot be selected.
the Speaker Configuration page
(page 46) cannot be selected.
4
Use the Up and Down [
]/[
]
buttons to select “a. Unit,” and
then use the Left and Right [
then use the Left and Right [
]/
[
] buttons to select:
feet:
Select if you want to enter
distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
meters:
Select if you want to enter
distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
5
Use the Up and Down [
]/[
]
buttons to select “b. Left,” and
then use the Left and Right [
then use the Left and Right [
]/
[
] buttons to specify the dis-
tance.
Specify the distance from the front left
speaker to your listening position.
speaker to your listening position.
6
Repeat step 5 for all speakers.
7
Press the [SETUP] button.
The setup menu closes.
Menu
------------------------
1.Initial Setup
2.Speaker Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
Basic Setup
2.Speaker Setup
------------------------
2.Speaker Distance
3.Level Calibration
4.Equalizer Settings
3.Level Calibration
4.Equalizer Settings
1.Speaker Config
2-2.Speaker Distance
------------------------
b.Left : 3.6m
c.Center : 3.6m
d.Right : 3.6m
e.Surr Right : 2.1m
f.Surr Back R : 2.1m
g.Surr Back L : 2.1m
h.Surr Left : 2.1m
i.Subwoofer : 3.6m
c.Center : 3.6m
d.Right : 3.6m
e.Surr Right : 2.1m
f.Surr Back R : 2.1m
g.Surr Back L : 2.1m
h.Surr Left : 2.1m
i.Subwoofer : 3.6m
a.Unit :meters
(This menu may be slightly different on
the TX-SR602/602E and TX-SR8260.)
the TX-SR602/602E and TX-SR8260.)
ENTER
ENTER
TX-NR702,602_En.book Page 49 Tuesday, September 7, 2004 1:18 PM