EverFocus EQ610 用户手册

- 23 - 

This mode masks areas you do not want to display on the screen.   
-OFF: Disable the PRIVACY function. 
-ON: 
 

AREA SELECT: Please select the area you would like to hide from the 8 areas in AREA 
SELECT mode   

 

AREA DISPLAY: Select “ON” to use the area selected in the AREA SELECT. Select 
“OFF” to disable this function.   

 

LEFT/RIGHT: Set the coordinate of the horizontal axis 6~98. 

 

WIDTH: Set the size of horizontal area 0~93. 

 

TOP/BOTTOM: Set the coordinate of the vertical axis 0~60. 

 

HEIGHT: Set the size of vertical area 0~61.   

 

COLOR: Set area color. It is selectable from 0 to 15.   

 

RETURN: Press “RET” to save all settings in RS485 menu and return to the previous 
menu. 

 

Press “END” to save all the menu settings and exit. 

 
5.8.6 SYNC 

There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In 
LINE-LOCK mode, the video signal is synchronized to the frequency of the incoming AC power. 
The Line-Lock synchronization can only be used when the supply power is 24VAC 60Hz (NTSC 
models) or 50Hz (PAL models). 

-INT: Internal synchronization   
-L/L: External line-lock synchronization 

 
5.8.7 LANGUAGE 
 

Select OSD language. EQ610 camera supports multiple languages including English, Japanese, 

 

Traditional Chinese and Simplified Chinese.   

 
5.8.8 RETURN 

Press “RET” to save all settings in the SPECIAL menu and return to the previous menu.

 

Press “END” to save all the menu settings and exit. 

 
 
5.9 ADJUST 
 

Adjust sharpness, Blue and Red level in this section.   

 
5.9.1 SHARPNESS 

The contour of the video image becomes cleaner and more easily distinguished as the level of 
SHARPNESS increases. If the level is set too high, it may affect the video image and cause noise. 
The available range of level is 0~31. 

 

5.9.2 BLUE 
 

Adjust image’s blue level. The available range of level is 0~100. 

 
5.9.3 RED 
 

Adjust image’s red level. The available range of level is 0~100.