EverFocus EQ610 用户手册

- 24 - 

Press “RET” to saves all settings in the ADJUST menu and returns to the previous menu.

 

Press “END” to save all the menu settings and exit. 

 
5.10 RESET 
 
5.10.1 FACTORY RESET 

Reset to the default settings. 

Press “RET” to return to the previous menu.

 

Press “END” to exit. 

 

Save all the menu settings and exit.

 

 
 
 
 
 
 

 

1.  Press IRIS + key to enter the setup menu. If the item has its own setting menu (sign    ), press 

the IRIS + button again to display the sub-menu. 

2.  Move the joystick      to move the cursor downwards and      to move the cursor upwards. This 

allows you to move between selection items in setup menu.   

3.  Move the joystick          to select or adjust the parameters of the selected item. The parameter 

changes each time as the item is selected by joystick. 

4.  Move the joystick      to select or adjust the parameters of the selected item. The parameter 

changes each time as the item is selected by joystick. 

 
Note:  
○

1

  When remotely controlled using RS-485, the SET/ENTER button function is equivalent to the bit 

pattern sent when one presses the IRIS + button. Thus use the IRIS + button on the keyboard or DVR 
in place of the SET/ENTER button when remotely controlling the EQ610. 
 
○

2

  RS-485 has a higher priority than control at the camera itself. If there is any conflict between local 

and remote control, the camera will follow the commands from the remote site. 

 

 

 

 

 

 

 

 

NOTE: 
If you quit a Menu without pressing EXIT, all the settings you previously modified will NOT be 
saved.