SonicWALL NSA 6600 用户手册

Connecting to the Internet   |   

17

Connecting to the Internet

After initial setup is complete, connect the LAN and WAN 
interfaces for access to external networks or the Internet. You 
cannot reach the Internet or other WAN destinations while 
connected to the MGMT interface. For Internet access, connect 
to X0 or another configured LAN interface. 

1.

Connect one end of an Ethernet cable to your computer or 
to your local network switch or other networking device. 

2.

Connect the other end of the Ethernet cable to the X0 
(LAN) port on your Dell SonicWALL NSA appliance. 

1.

Connect one end of an Ethernet cable to your Internet 
connection.
If you have a router, DSL modem, or cable modem, 
connect the Ethernet cable to a LAN port on the router or 
modem.

2.

Connect the other end of the Ethernet cable to the X1 
(WAN) port on your Dell SonicWALL NSA appliance.

Use the following steps to test your Internet connection:

1.

After you exit the Setup Wizard, connect your computer to 
the X0 (LAN) port. 

2.

Point your browser to the X0 IP address configured during 
initial setup, or to the default <

http://192.168.168.168

>.

3.

When the log in page appears, log into the SonicOS 
management interface as admin, using the configured 
password or the default, password.

4.

Open a command prompt window on your computer and 
enter the command: ping sonicwall.com

5.

Open another Web browser and navigate to: 
<

http://www.sonicwall.com

>.

If you can view the Dell SonicWALL home page, you have 
configured your Dell SonicWALL NSA 6600 correctly.

If you cannot view the Dell SonicWALL home page, try one of 
these solutions:

• Renew your management station DHCP address or restart 

your management station to accept new network settings from 
the DHCP server in the Dell SonicWALL appliance.

• Restart your Internet router to communicate with the DHCP 

client in the Dell SonicWALL appliance.