Canon VB101 用户手册

Message

%3

●A016 Amount of transmitted video data (info)

%1@%2 %3 frames/%4 bytes in %5 seconds

Number of frames

%1

Client type (LS/D | LS/H)

%2

Client host IP address

Explanation

This shows the results of video transmission for a video transmission client.

%4

Number of bytes

%5

Video transmission time

Message

Explanation

Response

●A022 Applet archive load failure (warning)

archive/%1 not found

The applet archive file does not exist or is corrupted.

Copy the missing (or damaged) file in the "/archive" applet from the CD-ROM and reboot. 
The original applet archive file is in the CD-ROM.

%1

Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip | 
imagemap.gif | snapanim.cab | snapanim.zip | digits.gif)

Message

Explanation

●A023 Status change of external input devices (err)

a %1 detected at %2

A change was detected at external device terminal In1 or In2.  "front edge" denotes OFF 

→ ON,

 "rear-edge" denotes "ON 

→ OFF, "pulse" denotes OFF → ON → OFF, 

and notch denotes ON 

→ OFF → ON. "pulse" and "notch" are brief (10-20 milliseconds) 

ON and OFF periods detected during OFF and ON states respectively.

%1

external device input change (front-edge | rear-edge | pulse | notch)

%2

external device terminal (In1 | In2)

Message

Explanation

●A024 Picture recording suspended and restarted (notice)

picture recording %1

Picture recording stopped because of error or picture recording  restarted because of error recovery. 
Error details will be output as A025.

%1

suspended | recovered