Tascam MD-CD1MKIII 用户手册

TASCAM MD-CD1MKIII

Operation basics

1  Select CD Menu or MD Menu.
  Front panel operation:
  Press the CD MENU button or the MD MENU button

to call up the desired menu.

Remote control operation:
Press the MENU button and either the CD Menu

or the MD Menu is called up, depending upon the

position of the CD/MD selector.
The sub-menu screen appears.

CD PLAY?

NOTE

In Menu mode, the

•

CD or MD indicators flashes to

indicate which menu is called up.
When a menu is chosen for a deck that is not the

•

display master, the display master indicator will remain

lit, while the indicator for the menu mode deck will

begin flashing. If the menu for the display master deck

is selected, its indicator will begin flashing.

2   Select the desired sub-menu.
  Front panel operation:
  Use the MULTI JOG dial to select, then press the

MULTI JOG dial or the YES button.

Remote control operation:
Use the MENU –/+ button to select, then press the

ENT/YES button.
The screen for the selected menu option will be

displayed.

PLAY MODE?

NOTE

To return to the sub-menu selection screen from a menu

option selection screen, press the NO button on either

the front panel or the remote control unit.
3  Select the desired menu option.
  Front panel operation:
  Use the MULTI JOG dial to select, then press the

dial.

Remote control operation:
Use the MENU –/+ button to select, then press the

ENT/YES button.
The setting screen will be displayed.

Mode>Cont

NOTE

To return to the menu option selection screen, press the

NO button on either the front panel or the remote control

unit. However, if the NO button is pressed for an EDIT

menu option, you will exit the Menu mode.

4  Settings
  Front panel operation:
  Use the MULTI JOG dial to select, then press the

dial.

Remote control operation:
Use the MENU –/+ button to select, then press the

ENT/YES button.

NOTE

Some menu options exist for confirmation purposes

•

only, and setting cannot be performed.
For MD Editing Menu operation, refer to “MiniDisc

•

editing” on page 40.
For Title Menu operation, refer to “Title input” on page

•

44.

5 How to exit Menu mode after setting (or

confirmation), during menu option display.

Front panel operation:
Press the CD MENU or MD MENU button

corresponding to the current Menu mode.

Remote control operation:
Press the MENU button.

The CD or MD indicator will stop flashing.

NOTE

The

IR REMOTE?

option on the SYSTEM sub-menu of

the CD menu enables you to set the unit so that it will not

respond to remote control button operations (excluding

certain buttons). Set the option to

Enable

so that the

unit will respond to all remote control button operations.

6 – Menu Operation