Tascam MD-CD1MKIII 用户手册

TASCAM MD-CD1MKIII

Pitch control (CD only)

When playing back an audio CD, the pitch (or speed) of

the playback can be varied. Pitch can be varied –50% to

+16% for CD.

NOTE

Pitch control does not function for data CDs.
Front panel operation
1 During stop, playback or playback standby mode,

press the PITCH control to turn the Pitch Control

function on.

2 Rotate the PITCH control knob to set the pitch.

NOTE

Use the

PITCH STEP?

option in the PLAY sub-menu of

the CD menu to adjust the pitch control steps from 0.1%

to 1.0% in 0.1% increments. (Default: 0.1%)
Remote control operation
1 During stop, playback or playback standby mode,

press the PITCH button to turn the Pitch Control

function on.

2 Use the PITCH –/+ button to set the pitch.
Pitch is adjusted in 0.1% increments.

NOTE

Pitch control only functions during normal playback.

•

During recording, pitch control does not function.
When turning the pitch control on and off during

•

playback, sound output is cut for a short instant.

Single-track playback

This function enables playback of just a single track.
During stop mode, press the P. MODE button on

the remote control, and

SINGLE

lights up in the

display.
Stops playback after playback of a track has finished.

NOTE

If the Repeat function is also on, the selected track will

•

be played repeatedly.
You can also use the

•

PLAY MODE?

option in the

PLAY sub-menu of the MD and CD menus to set the

Single track playback mode.
Even when the power is turned off, the Single-track

•

playback mode settings are retained.

Program playback

This function enables playback of selected tracks in any

desired order. Up to 99 tracks can be selected from a CD,

or up to 25 tracks from an MD, for Program playback.
Programs of up to 100 discs including CD and MD can be

retained.
1 During stop mode, press the P. MODE button on

the remote control until

PROGRAM

is indicated on

the display.

The program number and total program playing

time will be shown on the character display. The

highest program number among the currently

registered programs appears on the program

number display immediately after the mode is

changed.

0p 0m 0s

Program number

Total program playing time

NOTE

You can also use the

•

PLAY MODE?

option in the

PLAY sub-menu of the MD and CD menus to set the

Program Playback mode.
The total program playing time does not appear for

•

data CDs.
Before setting up a program, press the

•

STOP (ª)

button to enter stopped status.

2 Use the number buttons on the remote control to

select each desired track for program playback,

then press the ENT/YES button.
The track number will be entered into the program.

NOTE

To set the program by front panel operation, use the

MULTI JOG dial to select the track number, then press the

dial to add the track to the program.
3 Repeat the above step 2 until the desired program

is completed.
As the program is being created, the program number

and total program playing time is revised on the

display.
To confirm program contents, press the skip buttons

during playback or playback standby.

NOTE

If the total program playing time exceeds 999 min 59 sec,

“

- - - m - - s

” is displayed.

4 When program setting is completed, press the

PLAY button to begin playback of the tracks in the

programmed order.

7 – CD and MD Playback