Tascam MD-CD1MKIII 用户手册

During MD or audio CD playback (or playback standby), 

when the TIME button on either the front panel or the 

remote control is pressed, the time display will switch 

through several modes in the following order.
Elapsed track time: no display light indication
Remaining track time: 

REMAIN

 is lit in the display

Elapsed disc time: 

TOTAL

 is lit in the display

Remaining disc time: 

TOTAL

 and 

REMAIN

 are lit in the 

display

During MD playback, the remaining disc time 

• 

indication, as with CD, shows the playback time 

remaining until the end of the disc. Please note that 

this may differ from the remaining time indicated when 

recording the MD.
When stopped, the total recording time is shown, 

• 

regardless of the status of the 

TOTAL

 and 

REMAIN

 

indicators.
When playing a data CD, elapsed track time is always 

• 

displayed, and the TIME button does not operate. 
For details on time display during recording and 

• 

recording standby on an MD deck, please refer to 

“Checking remaining MD time” on page 39.
Even when the power is turned off, the time display 

• 

mode setting is retained.

When nearing the end of a track or disc, a warning 

indication is shown on the display.
The number of seconds before the track/disc end that the 

warning is displayed can be set beforehand, so that when 

playback reaches that point, the 

EOM

 warning will begin 

flashing on the display.
To set the warning display time, use the 

EOM TRK?

 or 

EOM DISC

 options on the PLAY submenu of the MD and 

CD menus. Each can be set between 1 and 99 seconds 

in 1-second increments, or the warning display can be 

turned off.

The 

EOM

 warning function does not work with data CDs.

The following playback functions are for CD only, and are 

not available for MD playback.

The key of the music can be changed during CD playback. 

Please note that this feature does not operate with data 

CDs.
1  Use the 

KEY LEVEL?

Key Change function on.
The 

KEY

 indication lights up in the display.

Each time the 

• 

KEY button is pressed, the function is 

switched on or off. When the function is on, instead 

of an 

On

 indication, the key selected (in operation 1 

above) is indicated on the display. For example: 

Key 

2

In this condition, when a CD is played back, the key 

of the music is changed while the speed of the music 

remains the same.
Even when the power is turned off, the key change 

• 

setting is retained.
When the Key Change function is on, even if the Pitch 

• 

Control function is used to change the playback speed, 

the key of playback will remain fixed at the preset 

key. (Even if the key level is 0 (zero), the Key Change 

function can be turned on.)
When using the key control function, playback sound 

• 

may occasionally sound like vibrating. This is a result of 

a special process applied to CD playback sound and is 

normal.

When this function is on, when CD playback begins the 

song fades in, and when playback finished the song fades 

out.
1  To set the fade operation, use the menu options 

FUNC sub-menu in the CD menu.
FADE IN
The length of the fade in to the normal level can be 

set between 1 and 30 seconds in 1-second increments. 

(Default setting: 3 seconds).
FADE OUT
The length of the fade out into complete silence 

can be set between 1 and 30 seconds in 1-second 

increments.