Husqvarna 966451906 用户手册

30

 - English

Repair Instructions

Secure the clutch in a vice as shown in figure 16. 

Carefully remove the clutch springs. Remove the 

clutch shoe springs from the side that does not 

have text.

•  Clean and check all parts carefully. Parts must 

be replaced if cracked or showing signs of 

other defects. Always use original spare parts.

•  Check the thickness of the clutch shoes by meas-

uring them with slide callipers across the whole 

clutch hub. If the thickness is below 60 mm, the 

clutch must be replaced. See figure 16.

Loosen the spark plug hat and remove the  

spark plug, and insert the plastic piston stop  

(575 29 36-01). See figure 15.

Loosen the clutch using tool 575 25 14-01nd a suit-

able socket wrench or combination spanner. Turn 

the clutch clockwise to loosen it. See figure 15.

Remove the cylinder cover. Release the brake by 

moving the kickback guard backwards. Loosen the 

bar nuts and remove the clutch cover, chain and 

bar. See figure 14.

Fig 14

Fig 16

Fig 15