Husqvarna 445e TrioBrake 用户手册

32 – English

•

Make sure the throttle control is locked at the idle 
setting when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to 
its original position when you release it.

•

Check that the throttle control and throttle lockout 
move freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the 
throttle control and check that the chain stops and 
remains stationary. If the chain rotates when the 
throttle control is in the idle position you should check 
the carburetor idle adjustment.

Check that the chain catcher is not damaged and is firmly 
attached to the body of the chain saw.

Check that the right hand guard is not damaged and that 
there are no visible defects, such as cracks.

Regularly check the vibration damping units for cracks or 
deformation.

Make sure the vibration damping units are securely 
attached to the engine unit and handle unit.

Start the engine and make sure the engine stops when 
you move the stop switch to the stop setting.

CAUTION! The start/stop switch automatically returns to 
run position. In order to prevent unintentional starting, the 
spark plug cap must be removed from the spark plug when 
assembling, checking and/or performing maintenance.