Husqvarna 545RX 用户手册

24 – English

Start throttle: (345 FR, 545 RX, 545 RXT)

Set the throttle to the start position by first pressing the 
throttle lockout and the throttle trigger, then pressing the 
start throttle button (A). Then release the throttle lockout 
and the throttle trigger, followed by the start throttle 
button. The throttle function is now activated. To return the 
engine to idle, press the throttle lockout and throttle 
trigger again.

If the machine is fitted with a decompression valve (A): 
Press the valve to reduce the pressure in the cylinder and 
make starting easier. You should always use the 
decompression valve when starting the machine. Once 
the machine has started the valve will automatically return 
to its original setting.

Hold the body of the machine on the ground using your 
left hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until 
you feel some resistance (the starter pawls grip), now 
quickly and powerfully pull the cord. Never wrap the 
starter cord around your hand

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and 
apply full throttle; the throttle will automatically disengage 
from the start setting.

CAUTION!  Do not pull the starter cord all the way out and 
do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

Stop the engine by switching off the ignition.

Models equipped with heating elements in the handles 
have an on/off switch on the throttle handle to control the 
heat. Both the left and right handles have heating 
elements that automatically maintain a temperature of 
roughly 70

° when the heat is turned on.