Husqvarna 545RX 用户手册

English

 –

 25

1

Look around you:

•

To ensure that people, animals or other things cannot 
affect your control of the machine.

•

To ensure that people, animals, etc., do not come into 
contact with the cutting attachment or loose objects 
that are thrown out by the cutting attachment.

•

CAUTION! Do not use the machine unless you are 
able to call for help in the event of an accident.

2

Inspect the working area. Remove all loose objects, 
such as stones, broken glass, nails, steel wire, string, 
etc. that could be thrown out or become wrapped 
around the cutting attachment.

3

Do not use the machine in bad weather, such as 
dense fog, heavy rain, strong wind, intense cold, etc. 
Working in bad weather is tiring and often brings 
added risks, such as icy ground, unpredictable felling 
direction, etc.

4

Make sure you can move and stand safely. Check the 
area around you for possible obstacles (roots, rocks, 
branches, ditches, etc.) in case you have to move 
suddenly. Take great care when working on sloping 
ground.

5

Take great care when cutting a tree that is under 
tension. A tree that is under tension may spring back 
to its normal position before or after being cut. If you 

position yourself incorrectly or make the cut in the 
wrong place the tree may hit you or the machine and 
cause you to lose control. Both situations can cause 
serious personal injury.

6

Keep a good balance and a firm foothold. Do not 
overreach. Keep proper footing and balance at all 
times. 

7

Always hold the machine with both hands. Hold the 
machine on the right side of your body. Keep all parts 
of your body away from the hot surfaces. Keep all 
parts of your body away from the rotating cutting 
attachment.

8

Keep the cutting attachment below waist level.

9

Switch off the engine before moving to another area. 
Fit the transport guard before carrying or transporting 
the equipment any distance.

10 Never put the machine down with the engine running 

unless you have it in clear sight.

•

Always use the correct equipment.

•

Make sure the equipment is well adjusted.

•

Follow the safety precautions.

•

Organise your work carefully.

•

Always use full throttle when starting to cut with the 
blade.

•

Always use sharp blades.

•

Avoid stones.

•

Control the felling direction (take advantage of the 
wind).

IMPORTANT!

This section describes the basic safety precautions for 
working with brush cutters and trimmers.

If you encounter a situation where you are uncertain 
how to proceed you should ask an expert. Contact your 
dealer or your service workshop.

Avoid all usage which you consider to be beyond your 
capability.

You must understand the difference between forestry 
clearing, grass clearing and grass trimming before use.