Husqvarna 324RX 用户手册

18 – English

Never start the machine:

1

If you have spilled fuel on it. Wipe off the spillage and 
allow remaining fuel to evaporate.

2

If you have spilled fuel on yourself or your clothes, 
change your clothes. Wash any part of your body that 
has come in contact with fuel. Use soap and water.

3

If the machine is leaking fuel. Check regularly for leaks 
from the fuel cap and fuel lines.

•

Store and transport the machine and fuel so that there is 
no risk of any leakage or fumes coming into contact with 
sparks or naked flames, for example, from electrical 
machinery, electric motors, electrical relays/switches or 
boilers.

•

When storing and transporting fuel always use approved 
containers intended for this purpose.

•

When storing the machine for long periods the fuel tank 
must be emptied. Contact your local gas station to find 
out where to dispose of excess fuel.

•

The transport guard must always be fitted to the cutting 
attachment when the machine is being transported or in 
storage.

•

Ensure the machine is cleaned and that a complete 
service is carried out before long-term storage.

CAUTION!  The machine is equipped with a four-stroke 
engine.  Make sure that there is always sufficient oil in the oil 
tank.

Always use an unleaded quality petrol of at least 90 octane 
(RON).

Use low-emission gasoline, also known as alkylate gasoline, 
if it is available. 

•

The lowest recommended octane grade is 87 
((RON+MON)/2). If you run the engine on a lower octane 
grade than 87 so-called knocking can occur. This gives 
rise to a high engine temperature and increased bearing 
load, which can result in serious engine damage.

•

When working at continuous high revs a higher octane 
rating is recommended.

•

If the machine is not used for some time the fuel tank 
should be emptied and cleaned.

Check the oil level before starting the machine.  A too low oil 
level can cause serious damage to the engine.

When the machine is new the engine oil should be changed 
after the first month or after 10 hours of operation.

•

For the best result and function use HUSQVARNA engin 
oil.

•

When HUSQVARNA engine oil is not available another 
high grade engine oil can be used.  Contact your dealer 
when selecting oil. Engine oil for four-stroke petrol 
engines must be used. Quality class at least API SG. In 
general viscosity class SAE 10W-40 is recommended.

•

Never use oil intended for two-stroke engines.

The machine must be switched off and placed on a flat 
surface when you check the oil level.

Unscrew the oil cap, clean the dipstick located on the cap 
and insert the cap again without screwing it down.  Check 
the oil level on the dipstick.