Husqvarna 324RX 用户手册

16 – English

•

Fit the bottom half of the trimmer head (K) to the cover (I) 
by pressing them together, with the cut-outs on the 
bottom half aligned with the catches on the cover.

•

To dismantle, follow the instructions in the reverse order.

•

Fit the trimmer guard/combination guard (A) intended for 
use with the trimmer head/plastic blades. Hook the guard 
onto the fitting on the shaft and secure it with the bolt (L).

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.

At the front is an easily accessible, quick release. Use this if 
the engine catches fire or in any other emergency situation 
that requires you to free yourself from the machine and 
harness.

A well-adjusted harness and machine makes work much 
easier. Adjust the harness for the best working position. 
Tension the side straps so that the weight is evenly 
distributed across both shoulders.