Husqvarna XOUS2009 用户手册

9

ASSEMBLY

1.  Make sure the tension release lever is forward or

disengaged.

2.  Place the belt over the pulley on the deck. Refer to

illustration for proper routing.

3.  Move the tension release arm to the rear and 

engage in the latch.

Rear Of Deck

Idler Pulleys

Outer Pulley

Twist in Belt

Tension Release Arm

1.  Place the deck belt shield on the deck over the

drive pulley and secure with hardware removed 

from steel belt shield.

2.  Place retainer on the outer pulley cover.
3.  Align the tab end of the belt cover into the slot on 

the deck belt shield and the other end over the end

of the outer pulley cover.

4.  Secure with knob.

Retainer

Knob

Outer Pulley Cover

Deck Belt Shield

Belt Cover Tab

 Middle Chute Latch

1.  Using the hacksaw, trim along the dashed line.
2.  Locate the middle chute, flat washer, hood latch,

weld nut, lock washer and machine screw from kit.

3.  Install in the appropriate hole at the upper end of 

the middle chute, according to deck size.

Trim Line

Hood Latch

Weld Nut

Machine Screw

Lock Washer

Latch Location

Flat Washer

1.  Place middle chute over the top end of the blower 

assembly.

2.  Latch middle chute to blower assembly.

 Middle Chute

Blower Assembly