Husqvarna 953210103 用户手册

English

 – 13

Ignition: Set the stop switch to the start position.

Start position is achieved by moving the stop switch slightly 
backwards (356BT) or downwards (356BF) until the stop 
switch clicks into start position.

It is not allowed to set the stop switch in full throttle position.

Choke: Set the choke control in the choke position.

Primer bulb: Press the air purge repeatedly until fuel begins 
to fill the bulb. The bulb need not be completely filled.

Use the same starting procedure as for a cold engine but 
without setting the choke control in the choke position.

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord.

 Never wrap the starter cord around your hand

Repeat pulling the cord until the engine starts. When the 
engine starts, return choke control to run position.

CAUTION!  Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.

The engine is stopped by moving the stop switch to the stop 
position.