Husqvarna 230 ACX 用户手册

32 - English

7.

Refit the cover on the charging station. Ensure 
the three guides on the charging station enter the 
right holes in the cover.

Check the loop signal by looking to see what 
indication the green LED on the charging station is 
giving.

•

Steady light = the signal is okay.

•

Flashing once every other second = break in the 
loop and no signal found.

•

Flashing twice every other second = weak signal. 
This may be due to the boundary wire exceeding 
500 metres or that the cable is damaged. If the 
mower works, it is not a problem.

3.7 Linking Automower™ to the 
charging station 

1.

Open the control panel cover by pressing the 
STOP button.

2.

Place Automower in the charging station.

3.

Set the main switch to the ON position.

A start-up sequence begins when Automower is 
started for the first time. The following is 
requested: Language, time format, correct time, 
date format, date, and four-digit PIN code. All 
combinations except 0000 are permitted.

When you have chosen a PIN code with Automower 
placed in the charging station, the mower and charging 
station are then linked to each other.

3012-270

3012-282

3012-385
3012-408