Husqvarna 230 ACX 用户手册

English - 55

The Test IN (3-2-4) function is used to test how 
Automower finds its way into the charging 
station.

When the function is selected the mower will 
immediately follow the boundary wire, guide 1 or 
guide 2, depending on which one it finds first, in 
to the charging station. If there is a passage and 
the mower can not run through it, the Corridor 
width value is set too high. When Test IN is 
activated, the mower runs at the greatest 
distance from the wire that the selected corridor 
width permits.

The adjacent picture shows how Automower 
negotiates a passage when a value of 5 is set for 
the Corridor width, but not when a value of 6 is 
set.

The Test OUT (3-2-5) function is used to try 
different charge exit settings and to find out how 
far it is from the charging station to a remote 
area.

To test the settings for Follow loop out (3-2-1):

• State the value 100 % for Proportion for the 

remote area to be tested. Place Automower in 
the charging station and select Test OUT 
(3-2-5). The mower will now leave the charging 
station directly according to the stated direction 
and start mowing after the stated distance. 
Reset the Proportion value when testing is 
finished.

When Test IN (3-2-4) is used, the house icon 
on the display will come on and the mower 
will remain in the charging station. Press the 
Home button to return to operations.

3-2-4

 3012-672

3-2-4