Husqvarna 260 ACX 用户手册

16 - English

• Low voltage cable (21)

• Nails (24)

• Measurement gauge (25)

• Connector for the loop wire (23)

• Solderless coupler for the loop wire (26)

Contact your dealer for purchase of the following 
installation material:

• Loop wire for the boundary wire and guide wire 

(19)

• Staples (22)

During installation you will also need: A hammer to 
knock the staples into the ground, combination pliers, 
and a straight spade if the boundary wire is to be 
buried.

For examples of good positioning of the charging 
station, see 7. Garden example on page 56.

If you are going to install a guide wire, read 3.8 
Installation of the guide wire, see page 30, before 
choosing the position of the charging station.

The charging station must be positioned with a great 
deal of free area in front of it (at least 3 metres). It 
should also be positioned centrally in the working 
area so that Automower

®

 can easily find the charging 

station and quickly reach all parts of the working area.

It is a good idea to place the charging station in the 
shadow. The battery is spared if it is charged in the 
lowest possible ambient temperature.

The charging station must be positioned on relatively 
level ground. The height difference must not differ 
more than 5 cm between the front and rear of the 
charging station.

The charging station must not be positioned so that 
its plate bends.