Husqvarna 210 C 用户手册

 

English - 21

 

Use the boundary wire to demarcate areas inside the 
working area by creating islands around obstacles 
that can not withstand a collision, for example, flower 
beds and fountains. Run the cable out to the area, 
route it around the area to be demarcated and then 
back along the same route. If staples are used, the 
wire should be laid under the same staple on the 
return route. When the boundary wire to and from the 
island are close together, the mower can drive over 
the wire.

Obstacles that can withstand a collision, for example, 
trees or bushes higher than 15 cm, do not need to be 
demarcated by the boundary wire. Automower will turn 
when it collides with this type of obstacle.

However, for the most gentle and silent operation, it is 
preferable to demarcate all fixed objects in and around 
the working area.

Obstacles that slope slightly, for example, stones or 
large trees with raised roots, should be demarcated 
or removed. Automower can otherwise slide up onto 
this kind of obstacle causing the blades to be 
damaged. 

If the mowing result in the garden is uneven due to 
the shape of the garden, for example because of a 
long passage, you have the option of dividing up your 
garden into zones. This is done with the help of the 
boundary wire, see the figure on the right. When the 
mower is placed in zone 1, it will not mow in zone 2 
and vice versa Move the mower between the zones 
to maintain an even mowing results. Also see 6. 

 

 - proposed installation and settings 

page 34.

3012-764

3012-765

3012-787

30 cm

Zone 1

Zone 2