Husqvarna 210 C 用户手册

26 - English

Connect the boundary wire to the loop 
generator/charger:

1.

Place the cable ends in the connector:

• Open the connector.

• Place the wire in the connector grip.

2.

Press the connector together using a pair of 
pliers. Press until you hear a click.

3.

Cut off any surplus boundary wire. Cut 1 - 2 cm 
above respective connectors. 

4.

Attach the connector to the contact pin on the 
loop generator/charger.

3012-284

3012-264

3012-265

3012-771