Husqvarna 210 C 用户手册

English - 27

Check the loop signal by looking to see what 
indication the green LED on the loop 
generator/charger is giving.

•

Steady light = the signal is okay.

•

Flashing once every other second = break in the 
loop and no signal found.

•

Flashing twice every other second = weak 
signal. This may be due to the boundary wire 
exceeding 250 metres or that the cable is 
damaged. If the mower works, it is not a 
problem.

1.

Connect the loop generator/charger charging 
cable to the mower's charger contact. At most 
the mower may be two metres from the working 
area's boundary wire and the loop 
generator/charger must be connected to the 
mains supply.

2.

Open the control panel cover by pressing the 
STOP button. Set the main switch to the ON 
position.

3.

The yellow indicator lamp PIN code should now 
flash.

4.

Select and enter a four digit PIN code. All 
combinations except 0000 are permitted.

5.

Press the YES button.

6.

Confirm the selected PIN code by re-entering the 
PIN code.

7.

Press the YES button.

8.

The yellow indicator lamp PIN code flashes 
once, and then remains unlit.

When you have selected a PIN code, the mower and 
loop generator/charger are linked to each other and 
the mower can be operated.

3012-773

3012-758
3012-797

2 m

3012-785