Husqvarna 210 C 用户手册
English - 39
7. MAINTENANCE
Body
Use a damp, soft sponge or cloth to clean the body.
If the body is very dirty it may be necessary to use
a soap solution or washing-up liquid.
If the body is very dirty it may be necessary to use
a soap solution or washing-up liquid.
7.5 Replacing the blades
There are three blades on Automower, which are
screwed into the blade disc. The blades have two
edges to ensure a longer service life. The blade disc
rotates alternately to the left and alternately to the
right.
screwed into the blade disc. The blades have two
edges to ensure a longer service life. The blade disc
rotates alternately to the left and alternately to the
right.
All three blades and screws must be replaced at the
same time to obtain a balanced mowing system.
same time to obtain a balanced mowing system.
There are two blade variants with different
characteristics to choose from as accessories.
Contact your dealer for further information.
characteristics to choose from as accessories.
Contact your dealer for further information.
To replace the blades:
1.
Set the main switch to the OFF position.
2.
Wear protective gloves.
3.
Turn Automower upside down.
4.
Rotate the skid plate so that its hole aligns with
the screw for the blade.
the screw for the blade.
WARNING
Always use originalblades and
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.
3012-783
3012-422
3012-749
3012-272
3012-272