Husqvarna 308 用户手册

English - 29

The guide wire is a wire that is laid from the charging 
station towards, for instance, a remote part of the 
working area or through a narrow passage to be then 
connected with the boundary loop. The same cable roll 
is used for both the boundary loop and guide wire.

The guide wire is used by the robotic lawnmower to 
find its way back to the charging station but also to 
guide the robotic lawnmower to hard-to reach areas 
of the garden.

To ensure an even cut over the entire lawn, the 
robotic lawnmower can follow the guide wire from the 
charging station to the guide wire connection in the 
boundary loop and start mowing there. Depending on 
the garden layout, one should adjust how often the 
robotic lawnmower is to follow the guide wire from the 
charging station. See 6.4 Installation on page 45.

The robotic lawnmower runs at varying distances 
from the guide wire to reduce the risk of tracks 
forming when the robotic lawnmower follows the 
guide wire to and from the charging station. The area 
beside the wire which the robotic lawnmower then 
uses is called the Corridor.

The robotic lawnmower always runs to the left of the 
guide wire as seen facing the charging station. Thus 
the corridor is to the left of the guide wire. When 
installing, it is therefore important to create as much 
free space as possible to the left of the guide wire, as 
seen facing the charging station. It is not allowed to 
lay the guide wire closer than 30 cm from the 
boundary wire. 

The guide wire, as the boundary wire, can be stapled 
to or buried in the ground.

3012-952

At least 30 cm

Maximum
distance

At least 2 m

3012-951