Husqvarna 308 用户手册
English - 31
3. INSTALLATION
• - In the passage, the guide wire must therefore
be placed so that the robotic lawnmower has
as much space to run in as possible. The
distance between the boundary loop and the
guide wire must however be at least 30 cm.
as much space to run in as possible. The
distance between the boundary loop and the
guide wire must however be at least 30 cm.
If the guide wire has to be installed on a steep slope,
it is an advantage to lay the wire at an angle to the
slope. This makes it easier for the robotic lawnmower
to follow the guide wire on the slope.
it is an advantage to lay the wire at an angle to the
slope. This makes it easier for the robotic lawnmower
to follow the guide wire on the slope.
Avoid laying the wire at sharp angles. This can make
it difficult for the robotic lawnmower to follow the
guide wire.
it difficult for the robotic lawnmower to follow the
guide wire.
4.
Run the guide wire to the point on the boundary
loop where you wish to make the connection.
loop where you wish to make the connection.
5.
Lift up the boundary wire. Cut the boundary wire
using for instance a pair of wire cutters.
using for instance a pair of wire cutters.
At least 30 cm
Maximum
distance
distance
At least 2 m
3012-951
3018-061
135º
135º
90º
3012-953