Husqvarna 355FX 用户手册

18 – English

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Place the shredder blade (D) and support flange (F) 
on the output shaft.

•

Fit the nut (G). The nut must be tightened to a torque 
of 35-50 Nm (3.5-5 kpm). Use the socket spanner in 
the tool kit. Hold the shaft of the spanner as close to 
the shredder blade guard as possible.

•

Fit the trimmer guard/combination guard (A) intended 
for use with the trimmer head/plastic blades. Hang the 
trimmer guard/combination guard (A) on the two 
hooks on the plate holder (M). Bend the guard around 
the shaft and tighten it with the bolt (L) on the opposite 
side of the shaft. Use the locking pin (C). Place the 

locking pin in the groove on the screw head and 
tighten. See diagram.

•

Fit the drive disc (B) on the output shaft.

•

Centre the metal cup (P) on the drive disc’s blade 
guide.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse 
order.

H

H