Husqvarna PR 17 AWD 用户手册

16 – 

English

The lights are switched on and off using the power switch (1) 
on the control panel.

A seat heater or mobile phone charger are examples of 
articles that can be connected to the power socket (2).

The power outlet is switched on and off using power switch (3) 
on the control panel.

The voltage is 12 V.

The power outlet is fuse protected by its own fuse, which is 
located below the ignition switch.

The release control must be pulled out in order for the 
machine to be moved when the engine is shutoff.

Should you attempt to drive the machine with the clutch 
controls pulled out it will not move. The drive on the axle is 
disengaged when one of the controls is pulled out.

Pull the controls to the end positions, do not use an 
intermediate position.

PR 17 AWD and PF 21 AWD have one control for the front 
axle and one control for the rear axle.

•

Clutch control, rear axle

   - Control drawn out, drive system disengaged.

   - Control depressed, drive system engaged.

•

Clutch control, front axle

The control is positioned on the inside of the left front 
wheel.

   - Rear control (pulled out), drive system disengaged.

   - Front control (pushed in), drive system engaged.

•

Pull out the control to disengage the drive system.

•

Push in the control to engage to the drive system.

IMPORTANT! Always drive the machine with both clutch 
controls pressed in.

1

2 3

1

2

3