Husqvarna PR 17 AWD 用户手册
English
– 17
Driving
Cutting tips
•
Localise and mark stones and other fixed objects to avoid
collision.
collision.
•
Start with a high cutting height and reduce down until the
required mowing results are obtained.
required mowing results are obtained.
•
The mowing results are best with a high engine speed
(fast rotating blades) and low driving speed (slow moving
machine). If the grass is not too high and thick, the driving
speed can be increased without noticeably depreciating
the mowing result.
(fast rotating blades) and low driving speed (slow moving
machine). If the grass is not too high and thick, the driving
speed can be increased without noticeably depreciating
the mowing result.
•
The best lawns are achieved if the grass is cut often.
Mowing becomes more uniform and the grass cuttings
become more evenly distributed over the surface. The
total time consumption is not greater since it is possible to
select a higher driving speed without inferior mowing
results.
Mowing becomes more uniform and the grass cuttings
become more evenly distributed over the surface. The
total time consumption is not greater since it is possible to
select a higher driving speed without inferior mowing
results.
•
Avoid mowing a wet lawn. The mowing results are inferior
since the wheels sink down into the soft lawn.
since the wheels sink down into the soft lawn.
•
Hose down the cutting unit with water underneath each
time it is used. The cutting unit should then be put in the
service position.
time it is used. The cutting unit should then be put in the
service position.
•
When the BioClip function is used, it is very important that
the mowing interval is not too long.
the mowing interval is not too long.
Before starting
•
Read the safety instructions and information concerning
the placement of controls and functions before starting.
the placement of controls and functions before starting.
•
Perform daily maintenance before starting as set out in
the Maintenance schedule.
the Maintenance schedule.
Start the engine
1
Make sure that the clutch control is depressed. PR 17
AWD and PF 21 AWD have one control for the front axle
and one control for the rear axle.
AWD and PF 21 AWD have one control for the front axle
and one control for the rear axle.
2
Lift up the cutting unit by pulling the lever backwards to
locked position (transport position) and apply the parking
brake.
locked position (transport position) and apply the parking
brake.
The engine can not be started if the parking brake is not
pressed down.
pressed down.
3
Move the throttle control to the middle position.
!
WARNING! Clear the lawn from stones and
other objects which can be thrown out by
the blades.
other objects which can be thrown out by
the blades.
!
WARNING! Do not use the machine on
ground that slopes more than 10
ground that slopes more than 10
°°°°.... Mow
slopes upwards and downwards, never
across. Avoid sudden changes in direction.
across. Avoid sudden changes in direction.
IMPORTANT INFORMATION
The air intake grille in the engine cover behind the driver’s
seat must not be blocked by, for example, clothing, leaves,
grass or dirt. Impaired cooling of the engine. Risk of major
engine damage.
seat must not be blocked by, for example, clothing, leaves,
grass or dirt. Impaired cooling of the engine. Risk of major
engine damage.
2
1