Husqvarna ZTH6125 用户手册

English-

20

The baseplate itself stands on a pallet and the whole assembly can be handled using a standard forklift 
truck. To keep the goods as level as possible, two people should assist the truck driver. Driving and lifting 
must both be performed with care.

Remove the upper part of the crate from the wooden baseplate.

The mower (rear wheels not fitted) is secured to the baseplate by plastic straps and wooden blocks. Certain 
components that are to be fitted to the mower, or handed to the purchaser on delivery, are wrapped 
separately in plastic bags.

Remove the plastic sheeting covering the mower. 

When unpacking the mower, check that there is no transport damage. Any damage is to be reported to the 
transport company in the normal way.

The packaging is not to be returned.

1.

Charge the battery. The mower is 
normally delivered with a charged 
battery topped-up with electrolyte.

2.

Raise the rear of the mower until it is 
clear of the baseplate and the rear 
wheels can rotate freely. Hold firmly in 
position using blocks or jack stands.

3.

With the valves facing outwards, fit the 
rear wheels. Fit and tighten the wheel 
nuts on the wheel bolts. 

4.

Check and adjust the pressure in all the 
tires. The recommended pressure is 1 
bar (15 PSI).

5.

On both motion control levers, remove 
the lower bolts and loosen the upper 
bolts. Swing the levers to the upright 
position. Hand tighten the lower bolts in 
the rectangular holes. The levers are 
adjusted at a later stage.

6.

Push the levers out into their neutral 
slots.

8011-503

8011-502