Husqvarna ZTH6125 用户手册

English-

21

7.

In the space to the left of the hydraulic 
tank, cut the cable tie holding the rod to 
the top of the seat. Remove the split 
cotter, swing the seat backwards and 
connect the rod to the seat. Replace the 
split cotter.

Check that the contactor on the cable to 
the bottom of the seat is connected.

Swing the seat down and check that it is 
held by the catch on the left.

8.

Fit the armrests. Position the armrests 
with the greatest possible distance 
between them. The bolt heads should be 
on the inside (i.e. towards the seat back) 
and washers and nuts on the outside. 
Armrests, bolts, washers and anti-slip 
nuts are packed in a plastic bag 
accompanying the mower.

9.

Check the engine oil level.

With the mower standing on a flat 
surface, check the engine oil level. 

Unscrew the dipstick and pull it out. Wipe 
the dipstick dry and push it back. 

Do not screw the dispstick down.

Pull the dipstick up again and read the oil 
level.

8011-504

8011-505

8011-501