Husqvarna 6521CM 用户手册

Your lawn mower was shipped ready to be used as a 
mulcher.  To convert to bagging or discharging:

REAR BAGGING (See Fig. 4)
•      Lift rear door of the lawn mower and place the grass 

catcher frame hooks onto the door pivot pins.

•      To convert to mulching or dis charg ing operation, remove 

grass catch er and close rear door.

The engine speed was set at the factory for optimum per-
formance.  Speed is not adjustable.

•      Your lawn mower is equipped with an operator presence 

control bar which requires the operator to be positioned 
behind the lawn mower handle to start and operate the 
lawn mower.

Raise wheels for low cut and lower wheels for high cut, 
adjust cutting height to suit your requirements. Me di um 
position is best for most lawns.

•      To change cutting height, squeeze adjuster lever to ward 

wheel. Move wheel up or down to suit your re quire ments. 
Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts 
into hole in lever. Also, 9-position adjusters (if so equipped) 
allow lever to be positioned between the plate tabs.

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in 
severe eye damage.  Always wear safety glasses or eye shields while operating your lawn mower or per-
forming any adjustments or repairs.  We recommend standard safety glasses or a wide vision safety mask 
over spectacles.

SIDE DISCHARGING (See Fig. 5)
•      Rear door must be closed.

•      Open  mulcher  door  and  install  dis charge defl ector 

under door as shown.

•      Mower is now ready for discharging operation.

•         To convert to mulching or bagging operation, dis charge 

defl ector must be removed and mulcher door must be 
closed. 

FOR MULCHING -
1.    Rear door closed.

2.    Mulcher door closed.

FOR REAR BAGGING -
1.    Grass catcher installed.

2.    Mulcher door closed.

FOR SIDE DISCHARGING -
1.    Rear door closed.

2.    Discharge defl ector installed.