Husqvarna 6521CM 用户手册

下载
页码 18
7
OPERATION
TO EMPTY GRASS CATCHER (See Fig. 6)
1.    Lift up on grass catcher using the frame han dle.
2.    Remove grass catcher with clippings from under lawn 
mower han dle.
3.    Empty clippings from bag.
NOTE:  Do not drag the bag when emptying;  it will cause 
unnecessary wear.
BEFORE STARTING ENGINE
ADD OIL (See Fig. 7)
Your lawnmower is shipped without oil in the engine. For 
type and grade of oil to use, see “EN GINE” in the Mainte-
nance section of this manual.
CAUTION: DO NOT overfi ll engine with 
oil, or it will smoke on startup.
1.    Be sure lawnmower is level.  
2.    Remove oil dipstick from oil fi ll spout.
3.   You receive a container of oil with the unit.  Slowly 
pour the entire container down the oil fi ll spout into the 
engine.
NOTE: Initial oil fi ll requires only 18 oz. due to residual oil 
in engine from the manufacturers 100% quality testing. 
When changing oil you may need 20 oz.
4.    Insert and tighten dipstick.
IMPORTANT:
•      Check oil level before each use.  Add oil if needed.  Fill 
to full line on dipstick.
FIG. 6
FRAME 
HANDLE
FIG. 5
OPEN 
MULCHER DOOR
INSTALL 
DISCHARGE 
DEFLECTOR
MOWER IS NOW READY FOR 
DISCHARGING OPERATION
ENGINE 
OIL CAP
GASOLINE 
FILLER 
CAP
FIG. 7
PRIMER