Husqvarna M53 S 用户手册
14 –
English
STARTING AND STOPPING
Starting and stopping
Cold engine
If the lawn mower is being started for the first time press on
the fuel pump five times. After that you should press on the
fuel pump three times when starting a cold engine.
the fuel pump five times. After that you should press on the
fuel pump three times when starting a cold engine.
Warm engine
If the engine is warm you do not generally need to press the
fuel pump. If the engine has stopped because the petrol has
run out, fill with fuel, and press three times on the fuel pump.
fuel pump. If the engine has stopped because the petrol has
run out, fill with fuel, and press three times on the fuel pump.
Starting
Ensure the ignition lead sits correctly on the spark plug.
On the M53 S model disengage the drive on the wheel by
moving the clutch lever forward.
moving the clutch lever forward.
Pull the engine brake handle against the upper handlebar
with your left hand.
with your left hand.
Grip the starter handle, slowly pull out the cord with your right
hand until you feel some resistance (the starter pawls grip),
now quickly and powerfully pull the cord.
hand until you feel some resistance (the starter pawls grip),
now quickly and powerfully pull the cord.
Never twist the starter cord around your hand.
CAUTION! Do not pull the starter cord all the way out and do
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
Drive
The model M53 S is a self-propelled machine with the drive
on the front wheels.
on the front wheels.
To use the drive on the wheel pull the clutch lever towards
you.
you.
Stopping
Stop the engine by releasing the engine brake handle.
On model M53 S the drive is also disengaged when you
release the engine brake handle.
release the engine brake handle.
!
WARNING! Note the following before
starting:
starting:
Do not start a lawn mower unless the cutter
and all covers are fitted correctly. Otherwise
the cutter could come loose and cause
personal injuries.
and all covers are fitted correctly. Otherwise
the cutter could come loose and cause
personal injuries.
Always move the machine away from the
refuelling area before starting.
refuelling area before starting.
Place the machine on a flat surface. Ensure
the cutting attachment cannot come into
contact with any object.
the cutting attachment cannot come into
contact with any object.
On the M53 S model disengage the
drive on the wheel by moving the
clutch lever forward.
drive on the wheel by moving the
clutch lever forward.
Keep people and animals well away from the
working area.
working area.