Husqvarna Robotic Lawn Mowe 用户手册

76

Automower from

™

If this occurs in isolated areas it may 
be due to interference from metallic 
objects (perimeter fence, 
reinforcement bar) or buried cables in 
the vicinity.

Try moving the boundary wire.

The working area slopes too much.

Check that the boundary wire has 
been routed correctly.

The boundary wire has been routed 
the wrong way around an “island”.

Check that the boundary wire has 
been routed in accordance with the 
installation instructions.

The boundary wire is too close to the 
edge of the working area.

Check that the boundary wire has 
been routed correctly.

Automower cannot find the charging 
station.

 Change the search settings 
according to the Follow loop in (3-2-2) 
on page 55.

Change the position of the charging 
station.

The battery is spent.

Expected life is 1 - 3 years. Contact 
your dealer to replace the battery.

Wrong PIN code has been entered. 
Three attempts are permitted, the 
keypad is then blocked for five 
minutes.

Enter the correct PIN code.

Automower has got caught in 
something.

Free the mower and rectify the 
reason for the lack of drive. If it is due 
to wet grass, wait until the lawn has 
dried before using the mower.

The Automower makes poor contact 
with the contact strips in the charging 
station.

Check that the Automower has 
docked correctly in the charging 
station.

The contact between the charging 
strips and contact strips may be poor 
and the Automower has made a 
number of charging attempts.

Place the Automower in the charging 
station and check that the charging 
strips and contact strips make good 
contact.

An object is obstructing the 
Automower.

Remove the object.

An object is preventing the 
Automower from reversing out of the 
charging station.

Remove the object.

The Automower leans too much or 
has turned over.

Turn the mower the right way up.

The Automower is set in MAN 
operating mode.

This behaviour is normal; no action 
required.