Husqvarna Robotic Lawn Mowe 用户手册

Automower from 

77

™

If your Automower does not work correctly, follow the 
trouble shooting guide below. If the fault persists; 
contact your dealer.

Automower works too few hours per 
day.

Increase the mowing time, see 6.4 
Timer (2) on page 49.

Working area too large.

Try limiting the working area or 
extending the working time, see 6.4 
Timer (2) on page 49.

Dull blades.

Replace all the blades and screws so 
that the rotating parts are balanced.

Long grass in relation to the set 
cutting height.

Increase the cutting height and then 
successively lower.

Accumulation of grass by the blade 
disc or around the motor shaft.

Check that the skid plate and blade 
disc rotate easily. If not, the skid plate 
and perhaps the blade disc must be 
removed and the grass and foreign 
objects removed. See 8.5 Cleaning 
on page 72.

The Automower clock needs to be 
set.

Set the clock, see Time and date 
(4-4) on page 64.

The start and stop times for mowing 
are incorrect.

Adjust the start and stop time settings 
for mowing, see 6.4 Timer (2) on 
page 49.

Unbalanced blade disc or damaged 
blades.

Inspect the blades and screws and 
replace them if necessary.

The Automower is looking for the 
charging station.

No action. The blade disc does not 
rotate when the mower is searching 
for the charging station.

Grass or a foreign object is blocking 
the blade disc or skid plate. 

Dismantle and clean the skid plate 
and blade disc.

This behaviour is normal in high 
temperatures (gradually increasing 
above 25°C).

No action.