Husqvarna Rider 213 C 用户手册

English

 – 23

The cutting head can be placed in the service position to 
provide easy access for cleaning, repairs and servicing. In the 
service position the cutting unit is raised and locked in the 
vertical position.

1

Position the machine on flat ground. Apply and lock the 
parking brake. Set the cutting height control in the lowest 
position and lift up the cutting unit.

2

Release the clip on the front hood and lift off the fender.

3

Loosen the spring on the drive belt's belt idler by pulling 
the spring eye.

4

 Place the spring eye in the holder.

5

Lift off the drive belt and hang on the load-relieving hook.

6

Loosen on the cutting height stay and place in the holder.

7

Grip the front edge of the unit and pull forwards until it 
stops.

8

Lift the unit until it stops and a clicking sound is heard.

9

 The unit locks automatically in the vertical position.

1

Grip the front edge of the unit and loosen the lock, fold 
down and slide in the unit.

2

Replace the cutting height stay and the belt. Tension the 
belt with the belt adjuster.

3

Fit the front cover.

4

Set the cutting height control to one of the positions 1-10