Husqvarna WB48S e 用户手册

下载
页码 92
12 – 
English
STARTING AND STOPPING
Starting and stopping
Cold engine
Ensure the ignition lead sits correctly on the spark plug.
Starting: Open the fuel tap.
Choke: Set the throttle control in the choke position.
Warm engine
Use the same starting procedure as for a cold engine, but do 
not set the throttle control in the choke position.
Starting
Pull the engine brake handle against the upper handlebar 
with your left hand.
Grip the starter handle, slowly pull out the cord with your right 
hand until you feel some resistance (the starter pawls grip), 
now quickly and powerfully pull the cord.
Never twist the starter cord around your hand.
CAUTION! Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.
Drive
To engage the drive, push the clutch lever forwards. 
Stopping
Stop the engine by releasing the engine brake handle. 
The drive is also disengaged when you release the brake 
handle Only the drive can be disengaged by releasing the 
brake lever a bit.
Close the fuel tap.
!
WARNING! Note the following before 
starting:
Do not start a lawn mower unless the cutter 
and all covers are fitted correctly. Otherwise 
the cutter could come loose and cause 
personal injuries.
Always move the machine away from the 
refuelling area before starting.
Place the machine on a flat surface. Ensure 
the cutting attachment cannot come into 
contact with any object. 
Keep people and animals well away from the 
working area.