Husqvarna 16 AWD 用户手册

30 – 

English

7

Grip the front edge of the unit and pull forwards until it 
stops.

8

Lift the unit until it stops and a clicking sound is heard.

9

 The unit locks automatically in the vertical position.

1

Grip the front edge of the unit and loosen the lock, fold 
down and slide in the unit.

2

Replace the cutting height stay and the belt. Tension the 
belt with the belt adjuster.

3

Fit the front cover.

4

Set the cutting height control to one of the positions 1-7

To achieve the best mowing results it is important that the 
blades are undamaged and well-sharpened.

Check that the blades’ attachment screws are tight.

The blades should be balanced after sharpening.

Damaged blades should be replaced when hitting obstacles 
that result in a breakdown. Let the servicing dealer judge 
whether the blade can be repaired/ground or must be 
discarded.

To change a Combi unit from BioClip function to cutting unit 
with rear ejection, remove the BioClip plug located under the 
unit with three screws.

1

Put the unit in the service position, see Service position 
for the cutting unit.

2

Loosen the knob holding the BioClip-plug and remove the 
plug.

3

Replace the unit in normal position.

Fit the BioClip plug in the reverse order.

Replacing or sharpening the blades should be conducted 
by an authorised service workshop.